Rod-style for Use in Cylinders SSI Output Magnetostrictive Linear Position Sensors
You are here: Home » Products » Magnetostrictive Position Sensor » RH Magnetostrictive Position Sensor » Rod-style for Use in Cylinders SSI Output Magnetostrictive Linear Position Sensors

loading

Share to:
sharethis sharing button

Rod-style for Use in Cylinders SSI Output Magnetostrictive Linear Position Sensors

High resolution of up to 1 µm
Stroke length of up to 5500 mm (Customizable)
Measures several positions and speeds at the same time
Programmable output signals – invert, configure, and document the measurement range
Non-contacting, thus free from wear – no downtimes and a long service life
Expanded measuring with multi-magnet technology
SSI output
 
Availability:
Quantity:
  • RH

  • ORR

  • ORR-RH-M5500

Applications of Magnetostrictive Position Sensor

·Plastics machinery

·Hydraulics machinery industry

·Processing machinery


Introduction of Magnetostrictive Position Sensor

Magnetostrictive position sensor with magnetostrictive technology, bases on principle of pulse variation due to position variation.

Magnetostrictive position sensors are non-contact linear position sensors, magnet ring doesn't contact with thewaveguid, sensing position by magnetic pulse, thus free from wear, no downtimes, a long service life, and high resolution up to 0.001mm.


Special features of Magnetostrictive Position Sensor

·High resolution up to 0.001mm.

·Stroke length up to 5500mm(Customizable)

·Non-wear and non-contacting measurement method

·SSI output

Basic Specifications of Position Sensor

SpecificationsTechnical data

Stroke length

25~5500 mm (Customizable)
Resolution0.1/0.5 / 1 / 2 / 5 / 10 / 20 / 40/ 50 / 100 μm
Nonlinearity<±0.01% of full scale, minimum ±50μm
Repeatability<±0.001% of full scale, minimum ±1μm
Interface

SSI Synchronous Serial Interface

Output signalSSI output
Operating voltage24Vdc±20%
Current consumption<80mA(depends on stroke length)
Insulation strength500V
Operating temperature-40~+85℃
Vibration proof
20g(10... 2000 Hz)
Shock proof
50g
Magnet speedAny
Material

Electronic bin: Aluminum, Measuring rod: SUS304

Electrical connectionCable outlet or connector
IP protectionIP67


Installation dimensions

ORR-RH_RP Series Magnetostrictive Position Sensor-Dimension

RH series pressure-resistant rodshell, built-in installation design for hydraulic system, pressure-resistant 35MPa continuous, flexible and simple installation mode.Mounting thread form M18×1.5 or M20×1.5 or 3/4"-16UNF-3A.


Note: The measurement Non-usable area shown in the figure indicates that the output value of the sensor in this area is zero or unreliable. The default values of the first and last measurement Non-usable areas of this product are 50.8mm and 63.5mm respectively. The value of the measurement Non-usable area can be appropriately modified according to the needs of customers, please pointed out when ordering.


ORR-RH Series Magnetostrictive Position Sensor_SSI OUTPUT-Order Code


Note: The forward output of the sensor means that when the magnet ring moves away from the electronic bin, the output value increases and decreases when the magnet ring moves in the reverse direction.


Selection example: RH-M0500-S1-PH70-S2B700-S0

Indicates: The ordered product model is RH series displacement sensor, the measuring range is 500mm, the mounting thread form is M18×1.5, the measuring rod diameter is 10mm, 304 material, 7-pin M16 connector connection, no cable, SSI output (data bit length is 25-bit, output format is binary, resolution is 0.001mm, forward output, asynchronous mode), and the head non-usable area is 50.8mm and the end non-usable area is 63.5mm.


Previous: 
Next: 

PRODUCT CATEGORY

Product Inquire
ORR Sensor Co., Ltd. 
Total Sensor Solution

QUICK LINKS

PRODUCTS CATEGORY

CONTACT US

  Add : 6# Building, No. 285 Rongxing Road, Shanghai, 201613
   Phone : +86-18917497750
   E-mail : orr@orrsensor.com
   Skype : tanxi21
Copyright   2023 ORR Sensor Co., Ltd.